STS Series High Power Lasers

Available in 4000 or 5000 Watts

STS series 4000/5000 Watt lasers from PRC offer the power and performance to cut and weld the toughest materials while offering the lowest possible operating costs.

Features:
• Patented TURBO FLOW compressor
• Solid state high voltage power supplies
• Low gas consumption, based on PRC GEM technology
• Status Display Panel
• M^2 as low as 2.0 (K factor .5)
• Eyesafe 10.6 Micron standard, other wavelengths available

Plan View:

Specifications:

	STS 4000	STS 5000
Rated Power (CW)	4000 Watts	5000 Watts
Peak Power (Pulse)	10000 Watts	12500 Watts
Operating Costs	$5.46/hr	$6.54/hr
Gas Consumption	10L/hr (China 25L/hr)	25L/hr
Beam Mode	Q Mode (D Mode Optional)	Q Mode (D Mode Optional)
Beam Quality (M^2)	3.0 (2.0 W/D Mode)	3.0 (2.0 W/D Mode)
Heat Load	136,400 BTU/hr	160,994 BTU/hr
Coolant Flow	20GPM / 76LPM
Pulse Frequency
Gated Pulse	CW - 5kHz
Superpulse	CW - 1kHz
Hyperpulse	CW - 1kHz
Electrical
Volts/Hertz	460V/60Hz, 420V/50/60Hz, 380V/50/60Hz
KvA (@110% CW Power)	50.6	61.6
Cut Capacity
Steel	0.75" / 20mm	1.0" / 25mm
Stainless Steel	0.5" / 12mm	0.75" / 20mm
Aluminum	0.375" / 10mm	0.5" / 12mm