STS Series Mid-Power Lasers

Available from 2500 - 3300 Watts

STS series 2500/3000/3300 Watt lasers from PRC are the workhorse of laser job shops around the world. Thousands of these attractively designed single enclosure lasers are installed and operating 24-hours a day.

Features:
• Compact single enclosure laser
• Patented TURBO FLOW compressor
• Solid state high voltage power supplies
• Low gas consumption, based on PRC GEM technology
• Status Display Panel
• M^2 as low as 1.3 (K factor .77)
• Eyesafe 10.6 Micron standard, other wavelengths available

Plan View:

Specifications:

	STS 2500	STS 3000	STS 3300
Rated Power (CW)	2500 Watts	3000 Watts	3300 Watts
Peak Power (Pulse)	6250 Watts	7500 Watts	8250 Watts
Operating Costs	$3.89/hr	$4.18/hr	$4.47/hr
Gas Consumption	10L/hr (China 25L/hr)		25L/hr
Beam Mode	TEM 00 or D Mode		Q Mode
Beam Quality (M^2)	1.3 or 2.0		3.0
Heat Load	89,320 BTU/hr	95,771 BTU/hr	103,383 BTU/hr
Coolant Flow	18GPM / 68LPM		20GPM / 76LPM
Pulse Frequency
Gated Pulse	CW - 5kHz
Superpulse	CW - 1kHz
Hyperpulse	CW - 1kHz
Electrical
Volts/Hertz	460V/60Hz, 420V/50/60Hz, 380V/50/60Hz
KvA (@110% CW Power)	29.6	33	35
Cut Capacity
Steel	0.625" / 16mm	0.75" / 20mm	0.75" / 20mm
Stainless Steel	0.375" / 10mm	0.4375" / 11mm	0.5" / 12mm
Aluminum	0.25" / 6mm	0.3325 / 8mm	0.375" / 10mm