FH Series High Power Lasers

Available in 7000 or 8000 Watts

FH series 7000/8000 Watt lasers from PRC offer maximum power and performance to cut and weld the maximum thickness materials. These single enclosure lasers not only pack power, but have mode quality and stability suitable for reliable thick plate cutting 24/7.

Features:
• Patented TURBO FLOW compressor
• Solid state high voltage power supplies
• Low gas consumption, based on PRC GEM technology
• Status Display Panel
• M^2 as low as 3.0 (K factor .33)
• Eyesafe 10.6 Micron standard, other wavelengths available

Plan View:

Specifications:

	FH 7000	FH 8000
Rated Power (CW)	7000 Watts	8000 Watts
Peak Power (Pulse)	17500 Watts	19500 Watts
Operating Costs	$9.27/hr	$9.69/hr
Gas Consumption	25L/hr (China 50L/hr)	50L/hr
Beam Mode	Q Mode	Q Mode
Beam Quality (M^2)	3.0
Heat Load	210,000 BTU/hr	239,000 BTU/hr
Coolant Flow	40GPM / 152LPM
Pulse Frequency
Gated Pulse	CW - 5kHz
Superpulse	CW - 1kHz
Hyperpulse	CW - 1kHz
Electrical
Volts/Hertz	460V/60Hz, 420V/50/60Hz, 380V/50/60Hz
KvA (@110% CW Power)	76.5	85.5
Cut Capacity
Steel	1.25" / 32mm
Stainless Steel	1.25" / 32mm
Aluminum	0.5" / 12mm